Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
IEC 60335-2-25 Micro Oven Door Opening and Closing Testing Equipment
Product overview:
The microwave oven door opening and closing test equipment meets the requirements of IEC60335-2-25 clause 18, it is a dedicated tester which is used to inspect the wear resistance of the microwave door system, including the structure of the hinge, microwave seals and other related components that during use.
The device uses advanced PLC control system and humanized touch screen operator interface, the rotation angle and the speed of door opening/closing are adjustable. It is widely applicable to test vertical and horizontal door opening microwave oven. The test equipment is easy to operate, durable and practical.
Technical parameters:
| Input voltage | 230V/50Hz or match client's local power supply requirements |
| Output power | 2000W |
| Test station | Single (vertical and horizontal opening are switchable) |
| Operation mode | PLC 7-inch touch screen humanized operation interface operation |
| Driver | Servo motor |
| Testing maximum angle | (Microwave oven door opening angle) 0°- 180° (Adjustable input values) |
| Speed | Adjustable, 6 times/min under power on, 12 times/min under power off |
| Counting method | Digital counter, count once after door closing, automatically shut down after a preset number of times. |
| Automatic detection function | Alarm after the numbers of completions; if the internal components of the sample are damaged in the testing process, the testing equipment automatically shut down and record the final number of trials and activate the alarm device. |
| Outward appearance | Aluminum frame, Stainless steel closure plate |
| Conform to Standard | IEC60335-2-25 |
1. Door Opening Mechanism will be three types – Handle (Left open), Push Button (Spring attached inside) & Handle (top open)
2. Hinge will remain always on left side (Left open) & always on bottom side (Top open)
3. Angle limit: 0 to 180 deg.