Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
BS EN 12983-1 Double Handle Cookware Bending Resistance Test Equipment
Product information
The design of the cookware handle bending strength test apparatus of cookware complies with BS EN 12983-1:2020 clause 7.5 and Appendix D, figure D.1.
It is used for the bending strength test of the handle of the cookwares. The fastening connecting part of the handle bears a force of 100N, and there should be no failure in the joints such as riveting and welding.
Technical Parameters
| Loading bar type | D-section |
| Loading bar diameter | Ф10±0.1mm |
| Range of force | 1-500N |
| Scale resolution | 1° |
| Dimensions | Length * width * height: 1000mm*500mm*810m |
| Power supply | Match client's local power supply requirements |
Sample installation
Install the cookware as shown below, adjust the left and right, up and down positions of the push-pull force gauges to align the D-section loading bar(s) with the measured handle(s) position. If testing single-handle cookware, make sure that the distance between the contact surface of the D-section loading bar and the handle is 10±1mm from the end of the handle. If testing double-handle cookware, the positions of push-pull force gauges on both sides should be well adjusted.