Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
IEC60669 Clause 12.3.12 and Figure 10 Voltage Drop Tester for Plugs and Socket
Product Information:
The Voltage Drop Tester is designed and manufactured according to the standard requirements of IEC60669-1: 2017 clause 12.3.12 and figure 10, IEC60884-1: clause 12.3.12 and figure 12 and etc.
It is used to check screwless terminals shall be so designed that the connected rigid solid conductor remains clamped, even when it has been deflected during normal installation, for example, during mounting in a box, and the deflecting stress is transferred to the clamping unit.
Technical Parameters:
| Applied Standard | IEC60669-1 |
| Clause | 12.3.12 and figure 10 |
| Test Station | Single |
| Deflection Angle | 0-360° |
| Bending Direction | Towards any one of the 30°±3° difference, a total of 12 directions |
| Bending Force | 0.25 N, 0.5 N, 1.0N |
| Direction of Application | Perpendicular to the direction of the unbending wire |
| Operation Method | Manual |
| Judgement Criterion | Voltage-drop not greater than 25 mV or greater than 1 min |
