Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
IEC 62368-1 Clause Y.2 and Annex C Water-Cooled Xenon Weathering Test Chamber
Product Information:
This Water-Cooled Xenon Weathering Test Chamber is designed and manufactured according to the standard requirements of IEC 62368-1:2018 clause Y.2 and Annex C, etc. It is with imported Q-LAB water-cooled xenon-arc lamp, spectral irradiance 0.3W/m2～1.1 W/m2 (@340nm), together with other imported high quality components, the chamber’s quality is much higher than other versions of xenon weathering test chambers in the markets.
Technical Parameters:
| Applied standard | IEC 62368-1 |
| Applied clause | Y.2 and Annex C |
| Dimensions | 124cm×114cm×202cm (W×D×H) |
| Exposure area | 6500cm2/ About 65 standard samples (140mm×70mm) |
| Light source | 6.5kW long arc water-cooled xenon lamp (imported from the United States Q-LAB) |
| Light source life | About 2000h (based on irradiance 0.51W/m2 @340nm) |
| Irradiance display band | 340nm, 420nm, 300～400nm optional |
| Irradiance range | 0.3W/m2～1.1 W/m2(@340nm) 40 W/m2～120 W/m2(@300nm～400nm) |
| Sample temperature | Blackboard temperature: 40℃～110℃ Black mark temperature:40℃～120℃ |
| Temperature in the chamber | 38℃～80℃ |
| Humidity in the chamber | When illuminated: 30%RH～75%RH (related to temperature) In the dark: up to 100%RH |
| Test Conditions | Free combination of light, darkness and water spray Note: the water spray can be performed or not, if water spray is not used as per IEC 62368-1 Annex C.2.4, operator can set the spray time to be “0”. |
| Supported test standards | Conforms to SAE J2412, SAE J2527, ASTMG 155ISO 105-B02, ISO 105-B04, ISO 105-B06, ISO 4892-2-A, ISO 11341-1, and etc. With 4 custom methods, users can set test parameters by themselves to meet most common standard requirements. |
Chamber overview:
|
Comparison of xenon lamp spectrum and solar spectrum | |
| Applications | This is a weatherproof test chamber that uses a long arc water-cooled xenon lamp as the light source. It can provide corresponding environmental simulation and accelerated aging test for scientific research, product development and quality control. Widely used in industries such as automotive materials, plastics, packaging, coatings, inks, dyes, stabilizers, textiles, electronics and electrical appliances. |
| Features |
|
Control system:
| HMI | Comprehensive and easy-to-use human-machine interface (Will be in English)
|
