Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
IEC 62368-1 Clause 5.4.1.10 Vicat Softening Temperature Determination Tester
Product Information:
This test apparatus designed and manufactured according to the standard of IEC60065:2014 clause 7.2 and table 3, ISO75-1, ISO306.
It is mainly used for the determination of thermal deformation temperature and Vicat softening point temperature of non-metallic materials such as plastics, hard rubber, nylon, electrical insulating materials, long fiber reinforced composite materials, high-strength thermosetting extrusion materials, etc. Which is widely used in colleges and universities, scientific research units and product quality supervision and inspection units.
The instrument adopts PLC (programmable controller), touch screen display and operation, and the modular design temperature control unit, which make the performance of the instrument more stable and the operation easier and more convenient.
During the operation, operator only inputs the specimen size, the standard deflection and required weight of the test will be automatically calculated out, avoiding human calculation errors.
The test process can be completed by following the displayed prompts, with high degree of automation, low failure rate, and simple maintenance. It is an advanced instrument used for the determination of thermal deformation and vicat softening point temperature of non-metallic materials.
Technical Parameters:
| Applied standard | IEC 62368-1 |
| Applied clause | 5.4.1.10 |
| Temperature range | Room temperature -300℃ |
| Heating rate | 120±10℃/h (12℃±1℃/6min) 50 ± 5℃/h(5℃±0.5℃/6min) |
| Temperature error | ±1℃ |
| Deformation error | ±0.01mm |
| Minimum resolution of temperature | 0.1℃ |
| Minimum resolution of deformation | 0.001mm |
| Load range | 0.864N-49.03N |
| Load error | ±0.5% |
| Support span | 64-100mm continuously adjustable |
| Heating power | 3KW |
| Power supply voltage | AC220V/50Hz |
| AC220V/50Hz | Methyl silicone oil (the flash point temperature of the medium should be higher than the maximum test temperature) |
| Cooling method | Natural cooling above 150℃, water cooling or natural cooling below 150℃ |
| This machine has a horizontal host, and its dimensions | 560×620×640 |
| Fuel tank capacity | 12.5 liters |