Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
IEC 60702-1 Clause 13.6 Bending Test Equipment for Vehicle Charging Cables
Product Information:
The test equipment conforms to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability.
It uses the motor to drive the turntable to rotate the cables. For 500V cables, a voltage of 750V and for 750V cables a voltage of 1250V shall be applied, for 15 min in each case, between conductors and between conductors and sheath. For cables having a diameter ≤ 14mm, the sample shall be clamped and bent round the appropriate mandrel so that the cable forms a semi-circle extended by two straight portions (operation 1a). The clamping pressure shall be released and, whilst still in the jig, the sample shall be rotated through 180° around the longitudinal axis of the unbent portion until it is again in the form of a semi-circle extended by two straight portions (operation 1b).
Technical Parameters:
| Standard | IEC 60702-1 |
| Clause | 13.6 |
| Power supply | AC380V±10%/50-60Hz, 2.0kW |
| Drive way | Motor driven |
| Bending station | Two independent stations Small wheel: suitable for a group of 40mm~130mm; Big wheel: suitable for a group of 160mm~500mm |
| Bending test direction | Negative and positive direction |
| Clamping method | Mechanical clamping, adjustable clamping point position |
| Bending angle | 180° for positive and negative direction |
| The specifications of bending wheel(mm) | 40, 60, 80, 100, 120, 130, 160, 200, 250, 300, 350, 400,500. Match 4 PCS for each specification. |
| Bending frequency | More than 1 time/min |
| Bending times | 0~999999, can be preset |
| Equipment dimension | About.1400×1000×1300(mm)(W*H*D) |
| Equipment weight | 250Kg |