Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
IEC62196-1 Clause 7.11 EV Connector And Plug Breaking Capacity Test Equipment
Product Information For EV Connector And Plug Breaking Capacity Test Equipment:
The Vehicle Connector and Plug Breaking Capacity test machine conforms to the standard requirements of IEC60309-1 clause 20 and clause 21, IEC62196-1 clause 7.11 and clause 7.12 and etc.
It is used to verify whether electrical accessories such as electric vehicle charging interfaces, industrial plugs, socket-outlets and couplers can withstand the mechanical, electrical and thermal stresses that occurred during normal operation without excessive wear or other harmful effects.
The servo motor drives the mechanism to make the test samples repeat insertion and withdrawal actions. An external load can be used for the breaking capacity test. The power on / off time, test speed, stroke, and angle can all be preset on the touch screen.
Technical Parameters For EV Connector And Plug Breaking Capacity Test Equipment:
| Test station | Single |
| Control method | PLC intelligent integrated control, with color humanized touch screen |
| Drive mode | Servo motor drive |
| Sample clamping method | Mechanical clamping, the position of clamping point can be adjustable along the 3-axis fixture |
| Linear stroke | 0-100mm, can be preset (the spacing between test plug and test socket≥ 50mm) |
| Conduction time | 0-99.9s, can be preset (electrical contact should be maintained no more than 4s, no less than 2s) |
| Speed of Insertion and Separation | 0-0.85m/s can be preset, default (0.8±0.1) m/s |
| Test frequency | 0-10 cycles/min, can be preset (3.75cycles/min=7.5 stoke/min) |
| Test cycles | 0~999999 cycles, can be preset |
| Load power | External, providing standard required voltage, current and power factor, the load cabinet is optional |
| Optional load cabinet | Note: only with AC load cabinet, 0-70A, voltage 0-300V |
| Test contents | Appliance coupler/charging interface breaking capacity test Appliance coupler / charging interface normal operating life test |
| Detection function | An open circuit alarm can be realized during testing under load, and the cycles can be recorded real in time. |
| Safety protection | Ground protection, short circuit protection |
| Power Supply | Single phase AC220V±10%, 50/60Hz, 10A |