Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
IEC 60320-1 Single station Coupler Pulling Test Equipment Connector Test For Household
Standards For Coupler Pulling Test Apparatus:
IEC60320-1:2021 "Appliances couplers for household and similar general purposes- Part1:General requirements" clause 23.3 and figure 19.
Test principle For Coupler Pulling Test Apparatus:
Insert the connector into the device inlet corresponding to the type of connector to be tested and in accordance with the relevant standard table, and apply a lateral force to it using a spring force mechanism.
Technical parameters For Coupler Pulling Test Apparatus:
| Test station | Single station |
| Flexible cable bending height | 40±2 mm,adjustable |
| Power supply | AC 220V, ±50Hz |
| Working temperature | 5-35℃ |
| Humidity | 30%-90% |
| Pull force range | 0-100N |
| Pulling method | 50 times in one direction and then 50 times in the opposite direction |
| Cable selection and corresponding pull value table |  |
| Appliance input socket | Optional gauge according to requirements |
Structure For Coupler Pulling Test Apparatus:
The connector test shall be equipped with an appliance air inlet corresponding to the connector model to be tested and in accordance with the relevant standard table.