Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
IEC 60320-1: 2021 Coupling Force Transverse Tension Test Device For Input Sockets Test
Standards & Clause:
IEC 60320-1:2021 "Appliances couplers for household and similar general purposes- Part1: General requirements" clause 23.3, 23.6.2, 23.6.3, figure 9 and table 12 and table 13.
Product Information:
Sample and limitations: connectors/plug connectors and appliance input sockets with ratings greater than 0.2A, and appliance input and output sockets with connectors/plug connectors with separate front parts
Test purpose: Suitable for lateral pull test of connectors and appliance input sockets
Testing principle: Insert the connector into the input socket of the appliance that is consistent with its model and complies with the standard loose leaf, and uses the motor to drive the tray to lift and release the weight, thereby achieving lateral force application and vertical tension testing of the sample.
Equipment structure and characteristics: The connector test should be equipped with an appliance input socket that is consistent with its model and complies with the standard loose leaf.
Technical parameters:
| Test station | Single station |
| Flexible cable bending height | 40mm, adjustable |
| Power supply | AC 220V, ±50Hz |
| Control method | PLC control, touch screen operation |
| Drive mode | Electric |
| Test mode | 1. Cyclic pulling force mode: Table 12 pulling force, pulling 50 times in each of the four directions, each time lasting 1±0.5s 2. Straight pulling force mode: Table 13 pulling force, lasting 60±0.5s 3. Horizontal tension mode: Table 13 tension, lasting 60±0.5s in each of the four directions |
| Working temperature | 5-35℃ |
| Humidity | 30%-90% |
| Test times | 0-999999 times, can be preset |
| Pull force range | 6, 25, 35, 50, 75, 100N, combined weight implementation |
| Pulling method | Motor-driven pallet lifting and weight release implementation |
| Cable selection and corresponding pull value table |
|
| Sample installation fixture | Can be rotated 4-90° |