Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
Appendix F of TÜV Rheinland 2Pfg 2577/08.16 Robot Cable Bending Testing Machine
Product Information:
Standard: Appendix F of TÜV Rheinland 2Pfg2577/08.16 "Requirements for cables used in robot system"
Specimen and limitations: Industrial robot cables.
Test purpose: Used to test the bending resistance of the power cord of industrial robot cables when entering the joint.
Test principle: Using PLC control and servo motor drive, the bending test of industrial robot cables is carried out, and a certain load force is applied to the free end of the sample. The test speed, angle and number of tests can be preset through the touch screen.
Equipment structure and features: Chamber-type operating structure, strong versatility. The equipment is driven by a servo motor, with a centrally installed clamp, and the up and down eccentricity is adjustable. When clamping the sample, the swing axis and the point where the soft wire enters the instrument can be coincident as much as possible, thereby achieving the minimum lateral displacement of the cord and load.
Technical Parameters:
| Control system | PLC control, 7-inch color touch screen operation |
| Drive mode | Servo motor + precision reducer transmission mechanism |
| Station | Single station, customizable 6 stations |
| Test items | Bending test |
| Main technical parameters of bending test | |
| Sample | Industrial robot cable Φ1.0 ~ Ф40mm |
| Sample clamping method | Mechanically clamped to a special fixture, the clamping point position is adjustable
|
| Bending angle | 0-360° adjustable (can be preset to ±30°, ±45°, ±60°, ±90°) |
| Bending direction selection |
|
| Bending rate | 0-60 times/min, touch screen preset |
| Bending times | 0~999999 can be preset, the default is 100 times |
| Load weight | 0.5N/mm², standard configuration: one each of 0.5, 0.75, 1.25, 2, 3, and 5N |
| Roller | Roller diameter: Φ10mm; 20mm; 30mm; 50mm; 75mm; 100mm. 2 each Rotation method: built-in bearing, can rotate with the sample (driven) Material: Nylon
|
| Distance between load-bearing weight and bending point | 50-250 mm (adjustable) |
| Sample rotation point to hanging weight height | 150-500 mm (adjustable) |
| Equipment size | WDH=1500X800X1820mm |
| Equipment weight | About 180kg |