Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
Static Tension And Compression Test Device For EV Charging Gun Cable Firmness Testing
Application, equipment principle and structure:
It is used to test the firmness of the clamping device of the charging gun cable. It is also used for the compression test of the cable to assess whether the charging gun cable can withstand the tension and compression in normal use, and to test its mechanical strength and reliability.
The motor drive mechanism is used to perform linear pull, pressure and other actions on the sample. The pull/pressure value and constant force time can be preset through the touch screen.
The structure diagram is shown below:
Main technical parameters:
| Sample range | Charging gun |
| Test station | Single station |
| Electrical control method | Touch screen operation |
| Drive mode | Motor drive |
| Sample clamping method | Mechanical clamping, 1. Configure 2 pc of tension clamp plates 2. Configure 1 pc of 500*500 compression plate |
| Internal dimensions of the column | WDH=600*600*1000mm |
| Height of stroke | 0-600mm |
| Test rate | 1-300mm/min can be preset |
| Constant force time | 1-999s, start timing after the force value is reached |
| Tension/Compression force | Force sensor monitoring, range 5000N, preset force value, switchable units N, kg, lb, accuracy 0.25, resolution 0.1N |
| Test items | Charging gun tension test Charging gun compression test; |
| Equipment size and weight | Approx.: 1200×600×1800 (mm) W×D×H, Equipment weight: 220kg |