Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
IEC 61855 Figure 13-14 Hair Straightener Tension Uniformity Tester with graph illustrated
Product Information:
Standard: Conform to IEC 61855 clause 5.8, figure 13 and 14.
Specimen and restrictions: Hair straightener.
Test purpose: Used to detect the tension uniformity of the hair straightener.
Test principle: Install 10 tension sensors on the fixed end of simulated hair, use a hair straightener to pull it from the top to the bottom, measure the tension value at each point and record the comparison.
Technical Parameters:
| | Input power | AC220V 50HZ |
| | Control method | PLC intelligent integrated control, 7-inch human-machine touch interface operation |
| | Drive mode | Servo motor drive |
| | Simulate hair fixing end | 10 straight-line distribution points, 5m apart, each point is equipped with an independent tension sensor |
| | Simulate hair | Nylon rope |
| | Tension sensor range | 0-50N, real-time monitoring, load accuracy: ±0.5%, resolution 0.01N |
| | Test stroke | 600mm, including fixture height |
| | Pull direction | Vertical |
| | Hair straightener clamping force | 10N, spring clamp applied |
| | Hair straightener pull-down speed | 5mm/s, driven and speed controlled by servo motor |
| | Tension collection | It is collected in real time by PLC through the tension sensor and transmitter, and each point is displayed with a tension curve. |
| | Sample power supply | The equipment comes with a universal power socket and mains power |
| | Configuration | Nylon rope, 1am and 2mm diameter, 20m long |
| 14. | Equipment dimensions | WDH=500x500x1100mm, 80kg |