Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
EV Charger Cable Anchorage Test Equipment IEC 61851-1 Pull Force & Torque Testing Machine
Product information:
This Cable Anchorage Pull and Torque Testing Machine is specially developed for electric vehicle charging stations, fully compliant with IEC 61851-1:2017, clause 11.6. It evaluates whether the charging connector and cable assembly can reliably withstand specified tensile forces and torsional stresses, ensuring long-term durability and user safety.
Application & Purpose
Designed for testing EV charging station cable connections
Verifies the mechanical strength of charging gun connectors under repeated pulling force and torque
Helps ensure compliance with international safety and performance standards
Working Principle
The equipment applies controlled pulling force through a motor-driven eccentric wheel or screw mechanism, with adjustable motor speed to guarantee precise loading. For torque testing, a motor combined with tray weights and a time relay delivers stable and repeatable torque application.
Key Features
Weight-based tension application and torque loading via torque arm and weights
PLC control system for automated test cycles and timing functions
Automatic stop when test cycle count or duration is reached
Clear compliance check: after testing, the maximum displacement of the charging connector cable must remain within the standard’s requirement
Usage Environment
Power supply: AC220V ±10%, 50/60Hz, 1kW
Operating temperature: 0–40℃, humidity: 30–90%
Dimensions: approx. 1600(W) × 600(D) × 1450(H) mm
Machine weight: about 180 kg
This apparatus is an essential quality control tool for EVSE (Electric Vehicle Supply Equipment) manufacturers, test labs, and certification bodies, helping ensure charging products meet international reliability and safety benchmarks.
Technical parameters:
| Test content | Supply plug and/or vehicle plug cable of EV charging station tension test and torque test |
| Equipment structure schematic diagram | Refer Schematic |
| Control operation mode | PLC automatic control, touch screen operation |
| Drive mode | Electric |
| Pull apply | Meet 160N, 200N, 240N, 250N, 500N specifications, realized by superposition of weights |
| Torque apply | Meet 0.6N·m, 0.7N·m, 1.4N·m, 2.7N·m, 5.4N·m, 11.0N·m, 16.3N·m specifications,realized by superposition of weights |
| Torque wheel | R100mm(Ф200mm) ±0.5mm |
| Tensile frequency | 1 time/s, the actual pull time is detected by electrical signal |
| Pull cycles | 1-999999 cycles, can be preset, default is 100±1 cycles |
| Torque application time | 0-99H59M59S,can be preset |
| Power failure protection | With power-off data storage memory function |
| Fixture | Universal clamp, one set |
| Weight matching selection table | |